Author Topic: How to setup p2pool  (Read 105 times)

Offline jackielove4u

  • Administrator
  • Sr. Member
  • *****
  • Posts: 376
  • Groestlcoin
    • View Profile
How to setup p2pool
« on: January 15, 2019, 02:19:10 pm »
The following were tested in Ubuntu 14.04 and Ubuntu 16.04, some dependencies can be different in other distros.
    • aptitude update -y && aptitude upgrade -y && apt-get update -y && apt-get upgrade -y && apt-get dist-upgrade -y
    • dd if=/dev/zero of=/swapfile bs=1M count=4096
    • mkswap /swapfile
    • swapon /swapfile
    • echo "/swapfile swap swap defaults 0 0" >> /etc/fstab
    • sudo apt-get install build-essential libssl-dev libboost-all-dev libdb5.3 libdb5.3-dev libdb5.3++-dev libtool automake libevent-dev bsdmainutils -y
    • sudo apt-get install git ntp make g++ gcc autoconf cpp ngrep iftop sysstat autotools-dev pkg-config libminiupnpc-dev libzmq3-dev -y
    • sudo apt-get install libgmp-dev libsqlite3-dev python python3 net-tools zlib1g-dev
    • git clone https://github.com/groestlcoin/groestlcoin
    • cd groestlcoin
    • ./autogen.sh
    • ./configure
    • make
    • strip src/groestlcoind src/groestlcoin-cli src/groestlcoin-tx
    • sudo mv src/groestlcoind src/groestlcoin-cli src/groestlcoin-tx /usr/bin
    • mkdir ~/.groestlcoin
    • nano ~/.groestlcoin/groestlcoin.conf
    • write:
      listen=1
      server=1
      maxconnections=865
      daemon=1
      txindex=1
      rpcuser=yourusernamehere
      rpcpassword=yourpasswordhere
      whitelist=127.0.0.1
    • Crtl+o enter, ctrl X
    • groestlcoind
    • Let it sync (can take up to 2 hours), verify with groestlcoin-cli
    • git clone https://github.com/Groestlcoin/p2pool
    • cd p2pool
    • sudo apt-get install python-zope.interface python-twisted python-twisted-web python-argparse python-pip setuptools -y
    • sudo pip install setuptools
    • sudo pip install -r requirements.txt
    • cd groestlcoin-subsidy-python
    • sudo python setup.py install
    • cd ..
    • ./run_p2pool.py --net groestlcoin --address YourPoolGrsAddressHere --give-author 0
    • Check if all is ok on http://YourIPAddressHere:11330/static/

 

anything