2

Author Topic: How to setup C-lightning and Fulmo on the same server  (Read 43 times)

Offline jackielove4u

  • Administrator
  • Sr. Member
  • *****
  • Posts: 373
  • Groestlcoin
    • View Profile
How to setup C-lightning and Fulmo on the same server
« on: January 20, 2019, 05:48:43 pm »
The following were tested in Ubuntu 14.04 and Ubuntu 16.04, some dependencies can be different in other distros.
    • aptitude update -y && aptitude upgrade -y && apt-get update -y && apt-get upgrade -y && apt-get dist-upgrade -y
    • dd if=/dev/zero of=/swapfile bs=1M count=4096
    • mkswap /swapfile
    • swapon /swapfile
    • echo "/swapfile swap swap defaults 0 0" >> /etc/fstab
    • sudo apt-get install build-essential libssl-dev libboost-all-dev libdb5.3 libdb5.3-dev libdb5.3++-dev libtool automake libevent-dev bsdmainutils -y
    • sudo apt-get install git ntp make g++ gcc autoconf cpp ngrep iftop sysstat autotools-dev pkg-config libminiupnpc-dev libzmq3-dev -y
    • sudo apt-get install libgmp-dev libsqlite3-dev python python3 net-tools zlib1g-dev
    • git clone https://github.com/groestlcoin/groestlcoin
    • cd groestlcoin
    • ./autogen.sh
    • ./configure
    • make
    • strip src/groestlcoind src/groestlcoin-cli src/groestlcoin-tx
    • sudo mv src/groestlcoind src/groestlcoin-cli src/groestlcoin-tx /usr/bin
    • mkdir ~/.groestlcoin
    • nano ~/.groestlcoin/groestlcoin.conf
    • write:
      listen=1
      server=1
      maxconnections=865
      daemon=1
      txindex=1
      rpcuser=yourusernamehere
      rpcpassword=yourpasswordhere
      whitelist=127.0.0.1
    • Crtl+o enter, ctrl X
    • groestlcoind
    • Let it sync (can take up to 2 hours), verify with groestlcoin-cli -getinfo
    • git clone https://github.com/Groestlcoin/lightning.git
    • cd lightning
    • ./configure
    • make
    • strip lightningd/lightningd cli/lightning-cli
    • mkdir ~/.lightning
    • nano ~/.lightning/config
    • write:
      alias=Groestlcoin
      network=groestlcoin
      bitcoin-rpcuser=yourusernamehere
      bitcoin-rpcpassword=yourpasswordhere
      bitcoin-rpcconnect=127.0.0.1
      bitcoin-rpcport=1441
      bind-addr=
      announce-addr=YOURIPADDRESS:9735
      rpc-file=/tmp/lightning-rpc
    • Crtl+o enter, ctrl X
    • screen -S lightning
    • ./lightningd/lightningd
    • Crtl+A, ctrl+D
    • check if all is ok: ./cli/lightning-cli getinfo
    • sudo pip install pylightning Flask qrcode[pil]
    • https://github.com/groestlcoin/fulmo
    • cd fulmo
    • screen -S fulmo
    • ./fulmo
    • Crtl+A, ctrl+D
    • Then just open a web browser to http://localhost:5000

 

anything